Innovation House
Alkmaar Way
Norwich
NR6 6BF, UK
Alkmaar Way
Norwich
NR6 6BF, UK
Saving Christmas: How Rapid Riser Analysis Transformed a Critical Offshore Project
View
Contact
Get in touch
Live electronic pressure monitoring
Our Digital Tension Monitoring System has been specifically designed to remotely measure, monitor, display and record the tension applied to riser and conductor systems, incorporating both local and remote alarm systems.
All riser and conductor tensioning systems must be monitored to ensure that the tension being applied is within the range of tolerance for the equipment; this is calculated during the riser analysis process. This ensures that the riser or conductor does not experience excessive strain, which could cause structural or fatigue failure. Previously, tension systems required a technician to manually read and record tensions approximately three times per every 12 hours with few ways to alert operators to a tensioning issue between physical inspections.
Our Digital Tension Monitoring System removes the need for manual tension monitoring. It works by electronically measuring the tension applied to the riser or conductor by using pressure transducers which turn hydraulic pressure within cylinders into an electronic reading. The outputs from these pressure transducers can be read remotely from an ATEX approved tablet, a control room PC or over a secure internet link anywhere in the world.
The configuration and set up ensures a best practice approach and consideration to fleet angles, rigging, nitrogen pre-charge, plus level of active or passive response reaction time – all of which can have an impact on operational windows and system fatigue damage. It provides instant notification of an alarm event, providing data for system fault finding/maintenance and to provide important supplementary data and alarms for low air, fluid or nitrogen pre-charge.
For more information on this product, get in touch with one of our specialists.
Learn more about our offshore carbon capture and CO2 monitoring platforms as well as measurement, verification, and response solutions to support capture, storage developments and net zero targets.
Conductor and caisson integrity services that support operators that extend the life of aging offshore platform assets in the often-difficult splash-zone area.
Complete seabed-to-surface packages with a proven track record of safe, efficient, and reliable performance internationally, from the planning phases right through to offshore implementation.
We apply our in-house resources, specialist skills and frontline experience to design, fabricate and install our surface riser systems for deployment worldwide.
Our Aquaterra Quick Connect (AQC) technology combines speed and safety for our lightweight, repeat make-and-break completion and workover riser systems.
We’ve developed our own market-leading range of riser system connectors, called the Aquaterra Quick Connectors (AQC) to reduce lead-times, capital and operational costs.
Complete centraliser packages for a range of operational requirements; from their initial design, through to project management and installation across a variety of operations.
In demand, readily available and proven in field riser tension systems to provide you with safe, dependable conductor tensioning systems from our Aquaterra Express service.
In demand, readily available quality engineering equipment, our SUREgrip tension rings are quick and simple to install, saving rig time and simplifying drilling operations.
Live electronic pressure monitoring that has been specifically designed to remotely measure, monitor, display and record the tension applied to riser and conductor systems.
An offshore digital solution to support increased operational windows and reduced fatigue for your system with real time data from our offshore operations.
An offshore digital solution that uses real-time wave, motion and current data and representative operational data to support operators with making informed decisions offshore.
Our Digital Commissioning and Completions Management System (CMS) is our own in-house system that’s dedicated to the safe and timely start-up your offshore energy asset.
In-demand, readily available and field proven cement top-up systems that range from simple single point cement injections to multi-staged cement injection systems.
Our PROTen Hang-Off Tool (HOT) has been designed to provide support to the conductor for several operations which will help you save vital rig time.
In-demand, readily available subsea and surface connectors for risers and wellheads that we have designed, developed and qualified as part of our own OEM connector range.
Our riser analysis team are market leaders in platform drilled conductor analysis, having completed over 90 separate projects for leading operators around the world.
We are specialists in developing intelligently engineered Drill Centre Templates to suit a wide range of operational requirements for Reduced time to first oil.
We're market leaders in tieback engineering, having completed over 400 separate projects for leading operators across the world to reduce rig time and risk.
We’re market leaders in tieback analysis, having completed over 400 separate projects for leading operators across the world, with a key focus on pre-planning.
We’re market leaders in jack-up drilled exploration/appraisal well conductor analysis, having completed over 170 separate analyses for operators around the world.
A low investment, rapid turnaround option to provide a review of proposed operational decisions before they are fixed in place and important capital is committed.
We can provide conductor whipstocks during slot recovery operations, to enable operators to install a second conductor, having cut and retrieved the first.
Designed to support low-pressure riser top hole drilling activities and provide a safe and effective method of fluid and pressure containment on any API cut casing or conductor profile.
Field proven technology to provide rig floor tensioning systems that are quick and easy to install, significantly reduce rig time and stack up height.
Our experience in offshore structural engineering puts us in a unique position for the design, fabrication, and installation of a range of bespoke tension tables.
In demand, readily available, high quality tension units, for situations where the use of a riser tension is unsuitable, to provide the required tension to a riser or conductor.
Our Aquascope subsea camera systems are essential for any drilling project with a requirement to obtain real-time and high-quality subsea images, operating to a maximum depth of 1000 metres.
We offer a top-tier fatigue management system designed for equipment used in various operations, setting the market standard.
By accurately predicting Vortex-Induced Vibration (VIV), our analysis services recommend VIV suppression systems, minimizing damage, extending lifetime, and reducing riser system costs.
A comprehensive solution for heavy lifting equipment, including analysis, installation, experienced engineers, and associated equipment for diverse subsea rig installation operations.
An extensive range of off the shelf rental tooling readily available for your call off, including complete packages of equipment cleanout kits for the following systems and operations.
Our supply includes a variety of subsea protective structures, such as subsea trees, wellheads, PLETs, PLEMs, and smaller deflector structures.
We’re are market leaders in jack-up high-pressure riser analysis, through our significant specific experience in designing, managing and running high pressure risers from jack-up rigs.
The industry's leading provider in both topside and subsea HPUs, offering expertise in designing, manufacturing, repairing, and refurbishing hydraulic power units.
Extensive experience of floating rig drilling analysis globally, completing over 35 projects in a range of water depths and environmental conditions.
Disposable camera systems, enabling real-time subsea visual feedback to the installation operator during difficult or unsupported subsea installation operations.
We specialise in building bespoke downhole tools to suit the specific needs of your project requirements. Whatever they might be.
An extensive selection of top-notch brushing tools, readily accessible and designed to meet a range of project requirements and applications.
State-of-the-art retrievable fibre optic gyroscope systems that can be fitted to subsea equipment to provide precise real time positional data.
An extensive range of rental tooling including polyurethane bullnose subs, to provide protection from the BHA when entering mudline hangers.
We stock a range of drill string director tools. These are dual purpose tools, with side outlet valves for jetting and orientation of the drill string.
We can provide multi-ported flushing tools for use on various downhole cleanout operations, such as BOP ram bodies, Seal and cavity areas and more.
We have a supply of HYTORC tools and equipment readily available that can enhance productivity, and significantly reduce operating costs.
We have wide-ranging experience when it comes to the design of hydraulic power units and can provide a range of hydraulic solutions and services.
Structural engineering services to ensure optimal performance and safety in a variety of different conditions and environments.
Trusted expert engineering for bespoke tension deck requirements for which can be designed for both new-build rigs or for an existing offshore rig.
A range of subsea protective structures, including subsea trees and wellheads to PLET’s and PLEM’s, as well as alternative smaller deflector structures.
A lightweight, dual barrier High-Pressure High-Temperature Riser Systems, low-cost system for use from Jack-Up rigs for subsea operations.